P6 indoor full color LED video display

Spec. p4 p5 p6 p7.62 Pitch(mm) 4 5 6 7.625 Density (pixel/m2) 62500 40000 27777 17200 LED SMD 3in1 SMD 3in1 SMD 3in1 SMD 3in1 Pixel configuration 1R1G1B 1R1G1B 1R1G1B 1R1G1B Size of module (L×H) 256×128mm 160×160mm 192×192mm 244×244mm Module resolution (L×H) 64×32 32×32 32×32 32×32 Weight/module(g) 250 150 165 255 Cabinet size (mm) 512×512×123 480×480×123 640×480×123 576×384×123 576×576×123 732×488×123 732×732×123 Brightness(cd/ m2) ≥2000 ≥2000 ≥1500 ≥1200 Power consumption /module Max:30W Avg:12W Max:18W Avg:6W Max:18W Avg:6W Max:18W Avg:6W Power consumption (w/ m2) Max:950W Avg:350W Max:700W Avg:230W Max:490W Avg:160W Max:300W Avg”100W View angle H120°/V120° H120°/V120° H120°/V120° H120°/V120° Drive IC PWM IC PWM IC PWM IC PWM IC Processing 16 bit/R,G,B Greys scale 65536 grade/R,G,B Frame rate ≥60 Hz Refresh rate ≥1920 Hz(Max:4800 Hz ) Color temperature 3200K—9300K Operating voltage AC220V/50HZ AC110V/60HZ Lifetime 50000h Dead dot <1/10000 Working condition Temperature -20°C +40°C; Humidity 10% 90% 1. HIGH REFRESH RATE This product use PWM high-end constant drive IC. The refresh rate of the display can reach 1920 Hz in the condition of single card loading, without losing gray scale, keep the image smooth and no scanning beam, which can meet the requirement of high-end applying for stage performance and rebroadcast etc. 2. ENERGY SAVING AND ENVIRONMENTAL PROTECTION Special design of circuit diagram and high-end drive IC can help to much improve the brightness of the display. On the assumption of suitable brightness and display property, the power consumption is much lower than the like products on the market, it can save electricity over 50%. 3. FLAT SCREEN, NO GAP Thanks to our patent bottom holder, we can connect the panels together without taking any of the auxiliary structures. The panels were made by high-precision molding plastic injection which ensure no slit on the screen and the panel surface looks quite flat. 4. WIDE-viewing angle The cover was fixed from the back and no screws could be seen on the front side, so the surface integrity of the screen is good and no bright spot would appear caused from light leak of the screws. The depth of the cover is no less then the height of LED lamps, there won’t be shadow or dark space on the screen under any degree of angle.